Victron energy BLUE POWER EasyPlus 12 Manuel page 7

2. DESCRIPTION
2.1 General
EasyPlus-functional
The EasyPlus is a powerful true sine wave inverter, a sophisticated battery charger that features
adaptive charge technology and a high-speed AC transfer switch in a single compact enclosure.
Beside these primary functions, however, the EasyPlus has several advanced features that provide
a range of new applications as outlined below.
Uninterrupted AC power
In the event of a grid failure, or shore or generator power being disconnected, the inverter within
the EasyPlus is automatically activated and takes over supply to the connected loads. This happens
so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to
operate without disruption.
PowerControl – Dealing with limited generator or shore side power
With a Multi Control Panel a maximum generator or shore current can be set. The EasyPlus will then
take account of other AC loads and use whatever is extra for charging, thus preventing the
generator or shore supply from being overloaded.
PowerAssist – Boosting the capacity of shore or generator power
This feature takes the principle of PowerControl to a further dimension allowing the EasyPlus to
supplement the capacity of the alternative source. Where peak power is so often required only for a
limited period, it is possible to reduce the size of generator needed or conversely enable more to be
achieved from the typically limited shore connection. When the load reduces, the spare power is used
to recharge the battery.
Programmable relay
The EasyPlus is equipped with a programmable relay that by default is set as an alarm relay. The relay
can be programmed for all kinds of other applications, for example as a starter relay for a generator.
3