JVC I'Art AV-27F485 Mode D'emploi page 39

On/Off Timer
The on/off timer lets you program your television to turn itself on or off. You can use it as an
alarm to wake up, to help you remember important programs, or as a decoy when you're not
home.
Press the M
To ON/OFF TIMER
π †
è
To operate (begins with ON TIME)
è
To set the hour (AM/PM) you want the TV to turn
on
To move to minutes
†
è
To set the minutes
To accept ON TIME and move to OFF TIME (the time the TV will turn off). Set the
†
OFF TIME the same way as ON TIME
To accept OFF TIME and move to CHANNEL
†
è
To select channel
To ON VOLUME
†
è
To set the volume level
To move to MODE
†
è
Choose ONCE or EVERYDAY
To ON/OFF TIMER
†
è
Choose YES to accept the timer setting, choose NO if you don't wish to accept
To FINISH
†
è
To save settings
Press the E
Notes:
• The on/off time cannot be set to locked or guarded channels.
• In order for the on/off timer to work, the clock must be set.
• After a power interruption, the timer settings must be reset.
• If you turn on your TV set before the on time, when the TV reaches the on time that you set,
the "SWITCHING TO ON TIMER" will appear. This means that the TV is going to change to
your on/off timer setting.
button
ENU
button when finished
XIT
Clock/Timers
� � � � � � � � � � � �
� � � � � � � � � � �
� � � � � �
� � � � � � �
� � � � � � �
� � � � � � � �
� � � �
� � � � � � � � � � �
� � � � � �
� � � � � � � �
� � � � � � � � �
�
� � � � � �
� � � � � � �
� �
� � � � � � �
� � � � � � � �
� �
� � � � � �
� � � �
39