JVC I'Art AV-27F485 Mode D'emploi page 20

Les langues disponibles

Remote Programming

DVD Codes

The remote control is programmed with DVD codes for power on/off, play, stop, fast-forward,

rewind, previous/next chapter, tray open/close, and still/pause operation.

1) Find the DVD player brand from the list of codes shown below.

2) Slide the first 2-way selector switch to "TV" and the other 2-way selector switch to "DVD".

3) Press and hold down the D

key pad.

4) Release the D

ISPLAY

• If your DVD player does not respond to the first code, try the others listed. If it does not

respond to any of the codes, try the search codes function on page 21.

• After you program your remote, some DVD buttons may not work properly. If so, use the DVD

player's remote.

��

button, then enter the first code number listed with the 10

ISPLAY

button, and confirm the operation of the DVD player.

��

I'art av-32f485 I'art av-27f475 I'art av-32f475 I'art av-36f475