JVC I'Art AV-27F485 Mode D'emploi page 16

Quick Setup
Auto Clock Set
Before you use any of your TV's timer functions, you must first set the clock. You may precisely
set your clock using the XDS time signal broadcast by most public broadcasting stations. If you
do not have this in your area, you will have to set the clock manually. See manual clock set
below. To set the clock using the XDS signal:
� � � � � � � � � � � � � � � � � � � � �
� � � � � � � �
� � � �
� � � �
� � � � � � � �
� � � � � �
� � � �
� � � � � � � �
� � � � � � � � �
Notes:
• D.S.T. can be used only for US and Canada when it is set to ON in the SET CLOCK menu.
• Only when the MODE set to AUTO, the Daylight Savings Time feature automatically adjusts
your TV's clock for Daylight Savings. The clock will move forward one hour at 2:00 am on
the first Sunday in April. The clock will move back one hour at 2:00 am on the last Sunday in
October.
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
Manual Clock Set
To set your clock manually (without using the XDS signal), choose MANUAL. If you choose
AUTO, see auto clock set above.
� � � � � � � � � � � � � � � � � � � � �
� � � � � � � �
� � � �
� � � �
� � � � � � � �
� � � � � �
� � � � � � � � � �
� � � � � � � �
� � � � � � � � �
Note:
• You will have to reset the clock after a power interruption. You must set the clock before
operating any timer functions.
16
è
�
†
� � � �
è
� � � � � � �
� � � � � � �
� � �
†
� � � � � �
� � � �
è
†
è
�
†
� � � � � �
è
� � � � � � �
� � � � � � �
†
� � �
è
†
� � � � � �
� � � �
Plug-In Menu
To choose AUTO
To TIME ZONE
To select your time zone:
(Atlantic, Eastern, Central, Mountain, Pacific,
Alaska or Hawaii)
To move to D.S.T. (Daylight Savings Time)
To turn D.S.T. ON or OFF
To NEXT (To Auto Tuner Setup)
To choose MANUAL
To TIME
To set the hour
To minute
To set the minute
To START CLOCK
(To be continued...)