Télécharger Imprimer la page

Ryobi RY18LMH37A Traduction Des Instructions Originales page 5

Masquer les pouces Voir aussi pour RY18LMH37A:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
A battery pack must be recharged only with
the charger specified by the manufacturer.
Using a charger with an incompatible
battery pack may create a risk of fire. Use
battery pack only with charger listed.
Use only battery pack intended specifically
for the product. Use of any other battery
packs may result in a risk of fire, electric
shock, or injury to persons.
When battery pack is not in use, keep it away
from other metal objects like, paper clips,
coins, keys, nails, screws, or other small
metal objects, that can make a connection
from one terminal to another. Shorting the
battery pack terminals together may cause
sparks, burns, fire or explosion.
Do not place battery products or their
batteries near fire or heat. This increases
the risk of explosion and possibly injury.
Do not open or mutilate the battery pack.
Released electrolyte is corrosive and may
cause damage to the eyes or skin. It may
be toxic if swallowed.
Protect the battery pack against moisture
and water. Do not charge the product in a
damp or wet location. Following this rule
will reduce the risk of electric shock.
In case of damage and improper use of the
battery, vapour may be emitted. Provide
for fresh air, and seek medical help in case
of complaints. The vapour can irritate the
respiratory system.
Do not leave the battery pack inside a
vehicle in hot or cold conditions.
Do not incinerate the battery.
Under abusive conditions, liquid may be
ejected from the battery; avoid contact.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the
battery may cause irritation or burns.
LAWNMOWER SAFETY WARNINGS
Before use, always visually inspect to
ensure that blades, blade bolts, and cutter
assembly are not worn or damaged.
Replace worn or damaged blades and
bolts in sets to preserve balance.
The blade on the product is sharp. Use
extreme caution and wear heavy-duty
gloves when fitting, replacing, cleaning or
checking bolt security.
Bring the product to an authorised service
centre to replace damaged or unreadable
labels.
Check all nuts, bolts, and screws at
frequent intervals for proper tightness to
be sure that the product is in safe working
condition.
Frequently check the grass catcher for
wear, holes, or deterioration.
Replace worn or damaged parts before
operating the product.
The product must be started with the user
behind the handlebars in the operator
safety zone. Never start the product if:
not all four wheels are on the ground
the grass discharge chute is exposed
and is not protected by the grass catcher
and grass discharge chute cover
hands and feet of all persons are not
clear of the cutting enclosure
Never operate the product if the on/off
switch on the handlebar does not properly
start and stop the product.
Never attempt to lock the on/off switches in
the on position; this is extremely dangerous.
Do not force the product. It will do the job
better and safer at the speed for which it
was designed.
Stop the blade when crossing gravel
surfaces.
Do not pull the product backwards unless
absolutely necessary. If you must back the
product away from a wall or obstruction,
first look down and behind to avoid tripping
or pulling the product over your feet.
Turn off the motor and allow the blade
to stop if the product has to be tilted for
transportation when crossing surfaces
other than grass, and when transporting
the product to and from the work area.
Never use the product with defective guards
or shields, or without safety devices, such
as deflectors or grass collectors, in place.
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
English |
3

Publicité

loading

Ce manuel est également adapté pour:

Ry18lmh37a-225Ry18lmh37a-250Ry18lmh37a-0Ry18lmh37a-250 one+