Always stop the engine and take off the lid of the spark plug before making
-
adjustments or repairs. Only exception is when adjusting the carburetor.
Only use original spare parts. If not you may experience bad performance or injury
-
and the warranty is invalid.
!
Examine the tool for loose bolts and nuts, leakage etc. Replace any
damaged parts. Replace the trimmer head / blade if it is cracked, chipped or
damaged in any other way.
!
Make sure that the trimmer head / blade is fitted correctly and securely
fastened. If not this may lead to serious personal injury.
!
Make sure that all safety guards and handles are correctly and securely
fastened.
!
The cord head rotates while the carburetor is adjusted. Wear protection and
follow all safety instructions.
!
Let the engine cool off before storage.
!
Empty the fuel tank and fasten the brush cutter when it is transported.
1. Blade
2. Shaft
3. Gas
4. Starter
5. Safety switch
6. V-handle
7. Holder for harness
8. Air filter
9. Lid for fuel tank
10. Fuel tank
11. Primer
12. Choke
13. Safety guard
14. Knife
15. Trimmer head
www.texas.dk
28