Installing The Accessories (Wall-Mount Bracket); Checking The Accessories - Sony BRAVIA KDL-42W674A Mode D'emploi

Installing the
Accessories
(Wall-Mount
Bracket)
To Customers
Sufficient expertise is required for installing
this product. Be sure to subcontract the
installation to Sony dealers or licensed
contractors and pay special attention to
safety during the installation. Sony is not
liable for any damages or injury caused by
mishandling or improper installation, or
installing any other than the specified
product. Your Statutory Rights (if any) are not
affected.
To Sony Dealers and Contractors
Sufficient expertise is required for installing
this product. Be sure to read this instruction
manual thoroughly to do the installation work
safely. Sony is not liable for any damages or
injury caused by mishandling or improper
installation. Please give this manual to the
customer after installation.
Your TV's Table-Top Stand will be used as a part
of the Wall-Mount Bracket.
• See page 29 (Safety Information) and page 32
(Precautions) on WALL-MOUNT BRACKET
before carrying out Wall-Mount Bracket
installation.
Precautions
• Detach the Table-Top Stand from the TV. For
details, see page 7 (Detaching the Table-Top
Stand from the TV)
• When your TV is installed on the wall, the VIDEO
IN 1 / terminal on the rear of the TV cannot
be used.
24
GB

Checking the accessories

Wall-Mount Base (1)
AC Adapter Holder (1)
Paper Template (1)
Stand Protector (1)
Bracket Cap Plate (1)
Assembling screws for Wall-Mount Bracket
(+PSW 6 x 12) (2)
Spacers (2)
Fixing screw for Bracket Cap Plate
(+PSW 4 x 10) (1)
~
• The screws needed to secure the Wall-Mount
Base and AC Adapter Holder to the wall are not
supplied.
Installing the Brackets on
the wall
1
Decide on the centre position of your TV.
Make a mark on the Paper Template that
indicates the screen centre of your TV,
referring to page 28 (TV installation
dimensions table) for the screen centre
dimension.
Paper
Template