BIXOLON SRP-330II Guide D'installation page 2

2) Virtual Switch Setting Mode
2-1) When the printer goes into virtual switch-setting mode, the following lines will be
printed.
** VMSM Selection **
0: Exit and reboot printer
1: Print current settings
2: Set Print Density
3: Set Print Speed
4: Set Cutting mode
5: Set External Buzzer after cutting
6: Set Internal Buzzer after cutting
7 or more: None
2-2) Make sure to press the FEED button to perform the above functions.
2-2-1) Step 1: The number indicates the number of times the FEED button needs
to be pressed. Make sure to press it for less than 1 second.
2-2-2) Step 2: Hold down the FEED button for 1 second or longer to enter the
selected item. If there is no selected item in Step 1, select "0: Exit
and reboot printer" to exit.
2-3) When the new settings are applied, hold down the FEED button for 1 second or
longer to save the changes. Cut the paper when the following line is printed.
(If "0: Exit and reboot printer" is not performed, the new settings will not be saved.)
*** COMPLETED ***
6. The settings will take effect after the printer reboots.
※ Note
You can check whether the printer operates normally or not through self-diagnostics. You
can check printing quality, ROM version, and DIP switch settings through self-diagnostics.
◈ WEEE(Waste Electrical and Electric Equipment)
This marking shown on the product or its literature, indicates that is should not be
disposed with other household wastes at the end of its working life, To prevent
possible harm to the environment or human health from uncontrolled waste disposal,
please separate this from other types of wastes and recycle it responsibly to promote
the sustainable reuse of material resources. Household users should contact either the
retailer where they purchased this product, or their local government office, for
details of where and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of
the purchase contract. This product should not be mixed with other commercial
wastes for disposal.
☎ BIXOLON Co., Ltd.
● Website http://www.bixolon.com
● Korea Headquarters
(Add) 7~8F, (Sampyeong-dong), 20, Pangyoyeok-ro241beon-gil,
Bundang-gu, Seongnam-si, Gyeonggi-do, 13494, Korea (ROK)
(Tel.) +82-31-218-5500
● U.S. Office
(Add) BIXOLON America Inc., 3171 Fujita St, Torrance, CA 90505
(Tel.) +1-858 764 4580
● Europe Office
(Add) BIXOLON Europe GmbH, Tiefenbroicher Weg 35 40472 Düsseldorf
(Tel.) +49 (0)211 68 78 54 0
All manuals and user guides at all-guides.com
◈ Safety Precautions
In using the present appliance, please keep the following safety regulations in order to
prevent any hazard or material damage.
Do not plug several products in one
multi-outlet.
• This can provoke over-heating and a fire.
• If the plug is wet or dirty, dry or wipe it before
• If the plug does not fit perfectly with the outlet,
• Be sure to use only standardized multi-outlets.
Do not pull the cable to unplug.
• This can damage the cable, which is the
Do not plug in or unplug with your
hands wet.
• You can be electrocuted.
If you observe a strange smoke, odor or
noise from the printer, unplug it before
taking following measures.
• Switch off the printer and unplug the set from the
• After the disappearance of the smoke, call your
Install the printer on the stable surface.
• If the printer falls down, it can be
PROHIBITED
Do not let water or other foreign objects
in the printer.
• If this happened, switch off and unplug
PROHIBITED
WARNING
Violating following instructions can cause serious injury or death.
You must use only the supplied adapter.
• It is dangerous to use other adapters.
usage.
do not plug in.
PROHIBITED
Keep the plastic bag out of children's
reach.
origin of a fire or a breakdown of the printer. • If not, a child may put the bag on his head.
PROHIBITED
Do not bend the cable by force or leave it
under any heavy object.
• A damaged cable can cause a fire.
PROHIBITED
CAUTION
Violating following instructions can cause slight wound or damage the appliance.
Keep the desiccant out of children's
reach.
• If not, they may eat it.
mains.
dealer to repair it.
PROHIBITED
TO UNPLUG
PRINTER
broken and you can hurt yourself.
PRINTER
the printer before calling your dealer.
PRINTER
ONLY SUPPLIED ADAPTER
PROHIBITED
PROHIBITED
PROHIBITED
Use only approved accessories and do not
try to disassemble, repair or remodel it
for yourself.
• Call your dealer when you need these services.
• Do not touch the blade of auto cutter.
DISASSEMBLING
PROHIBITED
PRINTER
Do not use the printer when it is out
of order. This can cause a fire or an
electrocution.
• Switch off and unplug the printer
before calling your dealer.
TO UNPLUG
PRINTER
DEALER