Télécharger Imprimer la page
BIXOLON STP-103II Guide D'installation
Masquer les pouces Voir aussi pour STP-103II:

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

KN04-00032A (Rev.1.2)
◈ Information
This Installation Guide includes a brief outline of information necessary
for product installation. For more detailed installation information,
please refer to the user manual in the enclosed CD. The contents of the
CD include the following.
1. Manual: User Manual, Code Chart, Control Commands
2. Drivers: Windows Drivers, OPOS Drivers
3. Utilities: a logo download tool
We at BIXOLON maintain ongoing efforts to enhance and upgrade the
functions and quality of all our products. In following, product
specifications and/or user manual content may be changed without prior
notice.
◈ Components
Cable
STP-103II
AC/DC Adaptor
◈ Connecting the cables
1. Turn off the printer and the host ECR (host computer).
2. Plug the power cord into the Adaptor, and then plug the Adaptor into
the power connector of the printer.
3. Plug the cable into the interface connector. (USB/Serial/ Parallel)
※ Note: Use the STP-103II exclusive interface cable only.
(Serial/ Parallel)
※ Do not use an adapter that was not supplied with the printer.
Interface connector
DK Port
◈ Using the Operation Panel
POWER ERROR
• POWER (LED, GREEN)
When turning on the power, a green LED will be lit.
• ERROR (LED, RED)
When the paper is running low, a red LED blinks.
• FEED (Button)
Press the FEED button once to discharge extra paper. Holding down the
FEED button will discharge paper continuously until the button is
released. The FEED button can be used when the ON-LINE button is
turned off.
• ON LINE (Button)
To use the FEED button, first press the ON-LINE button once.
Paper Roll
Power cord
Installation Guide
Interface cable
(Serial/Parallel)
USB Cable
Power cord
AC Adaptor
FEED
ON LINE
Printer Installation Guide
THERMAL PRINTER STP-103II
◈ Installing the Paper Roll
◈ Setting the DIP switches
Changing Dip Switch settings must be done when the printer is off.
Any changes done while the printer is on will not be processed.
Procuct Installation CD
Procuct Installation CD
Procuct Installation CD
Setting the DIP switch
SW
CD
SW 1-1
SW 1-2
SW 1-3
SW 1-4
SW 1-5
Handshaking
Character per
SW 1-6
Line (Font A)
SW 1-7
SW 1-8
[Table 1] Baud Rate Selection
Transmission Speed
2400 Baud
4800 Baud
9600 Baud
19200 Baud
38400 Baud
57600 Baud
115200 Baud
[Table 2] Font Select
Font size
Font A (12x24)
Font B (9x17)
Font C (9x24)
Reserved
◈ Self-Test
1. Make sure the paper roll has been installed properly.
2. Turn on the power while holding down the FEED button. The self-
test begins.
3. The self-test prints the current printer status, providing the control
ROM version and the DIP switch setting.
4. After printing the current printer status, self-test printing will print the
following, and pause. (The Error LED light blinks.)
5. Press the FEED button to continue printing. The printer prints a
pattern using the built-in character set.
6. The self-test automatically ends and cuts the paper after printing the
following.
7. After the self-test is complete, the printer returns to normal on-line
status.
※ Note
The self-test lets you know if your printer is operating properly. It
checks the print quality, ROM version, and DIP switch settings.
1. Insert a new paper roll,
2. Pull out a small amount of
※ Note
Printing quality may not be
optimum if recommended
paper is not used.
(Refer to the User's Manual.)
Function
ON
Baud Rate
* Refer to the Following
Selection
Table 1
Density
Dark
Xon / Xoff
24 CPL
* Refer to the Following
Font Select
Table 2
SW 1-1
SW 1-2
ON
OFF
OFF
ON
OFF
OFF
ON
OFF
ON
ON
OFF
ON
ON
ON
SW 1-7
SW 1-8
OFF
OFF
ON
OFF
OFF
ON
ON
ON
SELF-TEST PRINTING.
PLEASE PRESS THE FEED BUTTON
*** COMPLETED ***
making sure to align it
properly.
paper, and close the cover.
OFF
Default
OFF
OFF
ON
Normal
OFF
DTR/DSR
OFF
32 CPL
OFF
OFF
OFF
SW 1-3
Remark
OFF
OFF
ON
Default
ON
OFF
ON
ON
Remark
Default

Publicité

loading

Sommaire des Matières pour BIXOLON STP-103II

  • Page 1 3. Utilities: a logo download tool ※ Note Printing quality may not be We at BIXOLON maintain ongoing efforts to enhance and upgrade the optimum if recommended functions and quality of all our products. In following, product paper is not used.
  • Page 2 70 mm/sec 5. In the Question window, select Yes and the computer will reboot. at 25℃/printing duty 12.5% 6. After rebooting, open Start > Settings > Printers & Fax > BIXOLON Receive Buffer STP-103II Icon > Right-Click > Properties. 15K bytes...
  • Page 3 La qualité d'impression peut ne pas être optimale si un papier autre que Nous, BIXOLON, poursuivons sans cesse nos efforts afin d’améliorer et celui recommandé est utilisé. de mettre à jour les fonctions et la qualité de tous nos produits. Dans le (Se reporter au manuel d'utilisateur.)
  • Page 4 6. Après le redémarrage, ouvrir Démarrer > Paramètres > Imprimantes mémoire tampon 15Ko de réception et Fax > Icône BIXOLON STP-103II > Clic droit > Propriétés. SMPS Tension 7. Dans la fenêtre Propriétés, après avoir sélectionné l’onglet Général, 100 ~ 240 VCC d’entrée...
  • Page 5 APAGADO de alimentación de la impresora. [Tabla 1] Selección de velocidad de transmission 3. Conecte el cable al conector interfaz. (USB/Serie/ Paralelo) ※ Nota: Sólo use el cable interfaz exclusivo de la STP-103II. Velocidad de Coment SW 1-1 SW 1-2 SW 1-3 transmisión...
  • Page 6 6. Después de reiniciar, vaya a Inicio > Configuración >Impresoras y 15K bytes de recepción Faxes > Icono BIXOLON STP-103II > Clic derecho >Propiedades. SMPS Tensión de 7. En la ventana Propiedades, después de seleccionar la pestaña General, 100 ~ 240 VAC entrada haga clic en Imprimir página de prueba para confirmar que la...
  • Page 7 3. Ligue o cabo no conector de interface. (USB/ Série / Paralelo) Velocidade de Come SW 1-1 SW 1-2 SW 1-3 ※ Nota: Utilize apenas o cabo de interface exclusivo STP-103II. Transmissão ntário (Série / Paralelo) 2400 Baud LIGADO DESLIGADO DESLIGADO ※...
  • Page 8 6. Depois de reiniciar o computador, abra Start (Iniciar) > Settings Entre 5 e 40 ℃ (Definições) > Printers & Fax (Impressoras e fax) > Ícone (funcionamento) Temperatura BIXOLON STP-103II > Clique com o botão direito do rato > Entre -10 e 50 ℃ Properties (Propriedades). (armazenamento) Condições ambientais Entre 30 e 80% RH 7.