Areas of Application
When this device performs a massage, two massage heads massage the muscles twice.
This is intended to relax them and boost circulation. The device is designed in particular
for use on the upper back area (in particular the neck). But it can also be used to mas-
sage abdominal, buttock and leg muscles.
Neck and shoulders
Buttocks
Operating the Device
1. Place the massage balls (1) of the device onto the part of the body which is to be
massaged (see the "Areas of Application" section). For a shoulder or back massage,
place the straps of the device around your shoulders and fi x them in place either with
the belt (5) or with your hands. To do this, place either your arms or the belt through
the hand loops (3). If necessary, close the belt with the hook and loop fastener.
2. Press the ON / OFF button to start the massage. Use the control panel (2) to select
the function you want (see the "Items Supplied and Device Overview" chapter, "Con-
trol Panel" section).
3. After 15 minutes the device automatically switches off. To switch it off sooner, press
the ON / OFF button.
4. If used, pull the mains adapter out of the plug socket.
5. Clean the device if necessary.
19
Back
Thighs
The belt can be used to fi x the device to the body. To do
this, place the belt (5) through the hand loops (3).This
provides more freedom of movement without the device
slipping quickly.
EN
Abdomen
Calves