How To Use; Start Cooking; Finish Cooking - Haier MC-IF7042B1C-AWB Manuel D'utilisation

How to use

Start cooking

Touch the ON/OFF control for three seconds. After
power on, the buzzer beeps once, all displays show
"–" or "– –", indicating that the induction hob has
entered the state of standby mode.
Place a suitable pan on the cooking zone that you
wish to use.
• Make sure the bottom of the pan and the surface
of the cooking zone are clean and dry.
Touching the heating zone slider control , and a
indicator next to the key will flash.
Select a heat setting by touching the slider control
• If you don't choose a heat setting within 1 minute,
the Induction hob will automatically switch off. You
will need to start again at step 1.
• You can modify the heat setting at any time during
cooking.
If the display flashes
This means that:
• you have not placed a pan on the correct cooking zone or,
• the pan you're using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone.
The display will automatically disappear after 1 minute if no suitable pan is placed on it.

Finish cooking

Touching the heating zone selection control that
you wish to switch off.
alternately with the heat setting
EN-8
POWER UP
POWER DOWN