SNOWJOE 24V-X2-20SB Manuel D'utilisation page 10

Fig. 4
7. Timely recharging of the batteries will help prolong the
batteries' life. You must recharge the battery packs when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery packs to become
fully discharged as this will cause irreversible damage to the
batteries.
Charging a Hot or Cold Battery Pack
The green indicator lights on the charger base indicates that
the battery pack temperatures are outside the charging range.
Once the pack are within the acceptable range, normal
charging will take place and the red light will be continuous.
Hot or cold battery packs may take longer to charge.
Lithium-Ion Charging Status
Charger
Battery
Base
Pack
Indicator
Temperature
Light
Too hot
Green
Normal range
Red
Too cold
Green
Push lock
button
Battery
Pack Charging
Indicator Status
Light
Flashing
Not charging
together
Flashing Normal
one by one charging
Flashing
Not charging
together
Assembly
Assembling the handles
1. Mount the middle handle frame onto the lower handle
frame and align the holes. Join the handle frames with 2
sets of handle frame latches + threaded connectors as
shown (Fig. 5).
NOTE: When threading the connector, make sure the
latches are flipped down in the unlocked position as
shown.
Fig. 5
Middle handle frame
Lower handle frame
Latch Washer Threaded
connector
2. Secure with latches and connectors, then flip up latch to
lock the frame assembly in place (Fig. 6).
Fig. 6
Flip up to lock
10
Unlocked
position
(Flipped
down)