Publicité
Les langues disponibles
Les langues disponibles
Chute Crank Rod Assembly
1. Slide the chute crank rod through the hole on the chute
rod retainer located on the middle handle frame (Fig. 12).
Fig. 12
Middle
handle frame
2. Insert it into the opening at the back of the housing with
holes aligned (Fig. 13).
Fig. 13
Align the holes
3. Secure the crank rod in place with the cotter pin (Fig. 14).
Fig. 14
Cotter pin
Operation
m
toys or other foreign objects that the rotor blades might pick
up and throw. Such items could be covered by snow and are
easy to overlook, so be sure to conduct a thorough inspection
of the area before beginning work.
Starting + Stopping
1. Open the battery compartment cover and slide each
Chute
crank rod
Chute
Fig. 15
crank rod
retainer
2. While depressing the safety switch button, pull the
The opening
Fig. 16
3. To power off, release your grip on the ON/OFF trigger.
12
WARNING!
Keep the area to be cleared free of stones,
battery down until it clicks to lock it into position (Fig. 15).
ON/OFF trigger toward you. Once the machine powers on,
release the safety switch button and begin operation
(Fig. 16). The machine can only be started by depressing
the safety switch button first, followed by squeezing
the ON/OFF trigger; reverse operation will not start the
machine.
Safety switch
button
Battery
compartment
cover
Battery packs
On/Off trigger
Publicité
