Télécharger Imprimer la page

Kärcher Sensor XP12 Mode D'emploi page 6

Publicité

Les langues disponibles

Les langues disponibles

How To Use This Manual
This manual contains the following sections:
How to Use This Manual
Safety
Operations
Maintenance
Parts List
The HOW TO USE THIS MANUAL section will tell
you how to find important information for ordering
correct repair parts.
Parts may be ordered from authorized dealers. When
placing an order for parts, the machine model and
machine serial number are important. Refer to the
MACHINE DATA box which is filled out during the
installation of your machine. The MACHINE DATA
box is located on the inside of the front cover of this
manual.
Model:
Date of Purchase:
Serial Number:
Dealer:
Address:
Phone Number:
Sales Representative:
The model and serial number of your machine is
located on the bottom-back of the machine.
6
The SAFETY section contains important information
regarding hazardous or unsafe practices of the
machine. Levels of hazards are identified that could
result in product damage, personal injury, or severe
injury resulting in death.
The OPERATIONS section is to familiarize the
operator with the operation and function of the
machine.
The MAINTENANCE section contains preventive
maintenance to keep the machine and its compo-
nents in good working condition. They are listed in
this general order:
The PARTS LIST section contains assembled parts
illustrations and corresponding parts list. The parts
lists include a number of columns of information:
NOTE: If a service or option kit is installed on your
machine, be sure to keep the KIT INSTRUCTIONS
which came with the kit. It contains replacement
parts numbers needed for ordering future parts.
NOTE: The manual part number is located on the
lower right corner of the front cover.
8.643-386.0 Manual - Karcher Sensor XP12
Dust Bag
Filters
Blockage
Brush roller
Troubleshooting
ITEM – column refers to the reference num-
ber on the parts illustration.
PART NO. – column lists the part number for
the part.
REF NO. – reference number.
DESCRIPTION – column is a brief descrip-
tion of the part.
NOTES – column for information not noted by
the other columns.

Publicité

loading

Ce manuel est également adapté pour:

1.012-611.0