Publicité
Les langues disponibles
Les langues disponibles
KB300
Operations Instructions
Please Note
To assure proper installation, it is suggested that
a qualified person or carpenter install the Koala
Baby Changing Station. Koala Kare Products will
not be responsible if the station is not installed
properly. Koala Baby Changing Stations have
been tested to hold a substantial static load.
The unit must be attached to a permanent wall
that is capable of holding a substantial load. The
maximum recommended total weight for this baby
changing station (including baby and parcel bag) is
50lbs. Excessive weight may cause a hazardous or
unstable condition to exist.
Inspection Criteria
A properly maintained baby changing station:
• Opens and closes smoothly.
• Has a functioning strap and buckle. Strap is held
firmly in place when buckle is depressed over it.
• Offers parents liners through a fully stocked liner
dispenser. (Dispenser built into unit.)
• Provides a clean, convenient place for customers
to attend to their children.
Restraint System
Check strap by releasing the lever on the buckle and
pulling one end of the strap up through the bottom
of the buckle, depressing the lever when the strap is
tight. Give the strap a tug in the horizontal direction
away from the buckle, checking that the strap
remains in place beneath the buckle. To loosen the
strap, release the lever and pull the strap from the
bottom of the buckle.
Cleaning and Maintenance
We recommend that the surface of the unit be
cleaned prior to disinfecting. Use a clean nylon
brush or a rag to loosen and remove soil from
the textured surfaces. We recommend that you
use disinfectants and detergents that do not
contain overwhelming fragrances that can mask
inappropriate smells.
ASTM F2285-04 (2016)
WARNING: Never leave child unattended.
WARNING: Avoid serious injury from falling or
sliding out. Always use restraint system.
WARNING: Designed for Infants Only. Age up
to 3.5 years and weighing less than 50 lb (22.7
kg). Keep one hand on the child at all times.
WARNING: Parcels or accessory items, or
both, placed on the unit may cause the unit to
become unstable.
Replacement Parts
For a detailed instructions and a list of replacement
parts for this product, (such as straps, shocks and
labels) please visit www.koalabear.com.
Replacement parts and additional liners can be
purchased from your local distributor or direct from
Koala at www.koalabear.com.
ADA Requirements
Additional information on how this product
complies with ADA requirements can be found
in the KB300 & KB301 Baby Changing Stations
Accessibility Compliance document on
www.koalabear.com.
3
3
Publicité
