Publicité
Les langues disponibles
Les langues disponibles
5. Fit the face plate on the hood by screwing 2 screws.
6. Rotate the spot LED lights clockwise into the lamp hole.
7. Make the electrical connection.
Installation is now complete.
Notice:
-Exhaust air must not be discharged into a flue which is used for exhausting
fumes from appliance burning gas or other fuels.
-If the instructions for installation for the gas hob specify a greater distance
than 750mm, this has to be taken into account.
-The regulations concerning the discharge of exhaust air have to be followed.
Check with the local authority for building codes for exhaust ducting
requirements
8
Publicité
