Publicité
Les langues disponibles
Les langues disponibles
3. To remove the charcoal filters, take away the face plate first, then
remove the charcoal filter by turning anti-clockwise.
LAMPS
This rangehood may require two GU10 LED SPOT (AC 230V, 4W Max each)
WARNING: Always switch off the electrical supply before carrying out any
operation on the appliance.
To change LED spot:
1. Remove the aluminum filter.
2. Loosen the LED spot anti-clockwise, and replace with LED of same kind.
CAUTION:
1. THE SURFACE, THE LIGHT COVER MAY BE HOT. TAKE CARE WHEN
REPLACING LED LAMPS.
2. THE LED LAMPS MAY BE HOT. TAKE CARE WHEN REPLACING LED LAMPS.
We recommend only using lamps of the same specification as the
ones being replaced.
11
Publicité
