Recirculation version
The hood draws cooking fumes saturated with fumes and odor through the
grease filters and charcoal filters and returns clean air into the room. For
constant efficiency, the charcoal filters must be replaced periodically.
Decide from the outset on the type of installation (recirculation or
ducting). For greater efficiency, we recommend you install the hood
in the ducting version.
Electrical Connection
* Electrical wiring must be done by a qualified person(s) in accordance with
all applicable codes and standards. Turn off electrical power at service
entrance before wiring.
* If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
* Do not use the plug and an extension cord other than the ones initially
supplied with the hood.
INSTALLATION
Before beginning installation, to better handle the hood, we advise removing
the face plate.
1. The range hood is designed to operated with φ150mm exhaust Ducting.
If φ120mm exhaust Ducting has to be used, the φ120mm reducer is
required.
RECIRCULATING & DUCTING VERSION INSTALLATION:
Before fixing, the outlet exhaust duct for air evacuation to the outside must
be installed. Use an outlet exhaust duct with: - minimum indispensable
6