Publicité
Les langues disponibles
Les langues disponibles
Problem
The shaving sensor
responds even though
the shaver is not in
contact with the skin.
The shaver cannot be
charged with the self‑
cleaning recharger.
Shaver stopped
functioning.
ES-LV95_EU.indb
25
All manuals and user guides at all-guides.com
Action
Clean the beard trimmings from
the shaver.
When the shaver is extremely
dirty, remove the foil frame and
wash with water.
(See page 19.)
Replace the system outer foil
and/or inner blades.
Expected life of system outer
foil and inner blades:
System outer foil:
Approximately 1 year
Inner blades:
Approximately 2 years
Gently wipe the main body rear
terminals and the charging
terminals of the self‑cleaning
recharger with a cloth or tissue
dampened with water.
Recommended ambient
temperature for operation is
5 – 35 °C. The shaver may stop
functioning when out of
recommended ambient
temperature range.
The battery has reached the
end of its life.
Problem
While the shaving sensor lamp
glows, the shaving sensor is
The driving sound
operating. The sound changes
changes while shaving.
depending on the beard
thickness.
Press the power switch twice
The power will not
while using in the shaving
switch to OFF.
sensor mode.
►When the STATUS lamp glows
Problem
It is time to replace the
Pour new water and detergent
cleaning liquid.
into the cleaning liquid unit.
The cleaning liquid unit
Properly attach the cleaning
is not properly attached.
liquid unit.
The self‑cleaning
Place the self‑cleaning recharger
recharger is tilted.
on a horizontal surface.
Use the self‑cleaning
recharger outside the
Use within the recommended
range of the
temperature range of
recommended usage
15 – 35 °C.
temperature.
After performing the above operation, press the SELECT
button and select a mode.
►When all self-cleaning recharger's lamps blink
Problem
Contact an authorized service
Device failure
centre.
Action
Action
Action
25
2013/07/04
18:43:14
Publicité
