Publicité
Les langues disponibles
Les langues disponibles
Cleaning the shaver without the self-cleaning recharger
We recommend that you clean your shaver with the self‑
cleaning recharger or the sonic vibration cleaning mode when
the faucet symbol
appears on the lamp display.
1. Disconnect the cord from the shaver.
2. Apply some hand soap and some
water to the system outer foil.
3. Rotate the lock ring [A7] to unlock
the power switch [A6].
4. Press the power switch for more
than 2 seconds to activate the sonic
vibration cleaning mode.
• The battery capacity lamps blink in
order.
• After about 20 seconds, it will be
automatically turned off, or you can
turn it off by pressing the power
switch.
5. Remove the outer foil section [A]
and press the power switch for more
than 2 seconds to activate the sonic
vibration cleaning mode and clean it
with running water.
6. Wipe off any drops of water with a
dry cloth.
7. Dry the outer foil section and the
shaver completely.
8. Attach the outer foil section to the
shaver.
9. Lubricate the shaver.
ES-LV95_EU.indb
19
All manuals and user guides at all-guides.com
►Drying the shaver with the self-cleaning recharger
1. Attach the outer foil section [A] to the shaver.
2. Dry the shaver with self‑cleaning recharger using "Dry/
3. Lubricate the shaver.
4
Lubrication
To maintain shaving comfort for a long time, it is
recommended that the oil provided with the shaver is used.
1. Switch off the shaver.
2. Apply one drop of oil to each of
5
3. Raise the trimmer and apply a
4. Switch the shaver on, and run it
5. Switch off the shaver, and wipe off any excess oil from the
Cleaning with the brush
►Cleaning with the long brush
Clean the system outer foil
7
(a), the shaver body (b)
and the trimmer (c) using
the long brush.
Charge" mode.
the outer foils.
drop of oil.
for approximately five seconds.
outer foils with a soft cloth.
2
3
19
2013/07/04
18:43:13
Publicité
