Panasonic ES-LV95 Mode D'emploi page 17

3
3
Plug in the adaptor [C] into a household
outlet.
• The "Charge" mode starts when attaching the shaver.
• Check that the charge status lamp (
• Charging is completed after approx. 1 hour.
The charging time may decrease depending on the
charging capacity.
While charging
The charge status lamp (
glows.
The number of the battery
capacity lamp will increase
as charging progresses.
Abnormal charging
The charge status lamp (
• After charging is completed, turning the power switch ON
with the shaver plugged in will cause the battery capacity
lamp and the charge status lamp to light up and then turn off
after 5 seconds.
This shows that the shaver is fully charged.
14
ES-LV95_EU.indb 14
All manuals and user guides at all-guides.com
) glows.
After charging is completed
)
The battery capacity lamp
and the charge status lamp
will light up and then turn off
after 5 seconds.
) will blink twice every second.
• Recommended ambient temperature for charging is
10 – 35 °C. It may take longer to charge or the battery may
fail to charge properly in extremely high or low temperatures.
Charge the shaver within the recommended ambient
temperature range.
• When charging the shaver for the first time or when it has not
been in use for more than 6 months, the charge status lamp
( ) may not glow. It will eventually glow if kept connected.
4
4
Disconnect the adaptor after charging is
completed.
• You can charge even with the STATUS lamp of the self‑
cleaning recharger glowing.
• The appliance can be charged even with the cleaning liquid
unit removed.
Charging without the self-cleaning recharger
You can also charge without the self‑cleaning recharger.
1
1
Insert the appliance plug [C]
into the shaver.
• Turn the shaver off before inserting.
2
2
Plug in the adaptor [C] into a
household outlet.
• Wipe off any water droplets on the
appliance socket.
3
3
Disconnect the adaptor after charging is
completed.
Note
You cannot operate the shaver while charging.
2
1
2013/07/04 18:43:09