Xerox CopyCentre C123 Guide D'installation Rapide page 10

Quick Scan to FTP Setup
Files can be scanned on the multifunction device and routed on to a server or a client using FTP protocol.
Directory structures (repositories) need to be created on the server to hold the scanned documents.
See also:
System Administrator Guide: Contains more detail concerning Scan to FTP setup.
User Guide: Contains information on how to set up templates and repositories.
Prerequisites for Scan to FTP
1.
Confirm that an existing operational network utilizing TCP/IP is available.
2.
FTP Server/Client exists and is running.
3. Repository (folder) needs to be created on the FTP server to hold the scanned document.
4. Confirm that the following ports are enabled:
a. TCP/IP
b.
FTP Client
c. SNMP
d.
SOAP
Data to Set Up Scan To FTP
Repositories need to be set
up on the FTP server.
Server IP Address
FTP Login/password
information
Kerberos IP Address
All manuals and user guides at all-guides.com
Install
Requirement Comments
Required This is the location or path of the directory for saving
scanned documents.
Required This is the IP address of the FTP server.
Optional This is required if the FTP server requires login/password
authentication. Most FTP servers require a login/password.
Optional If Remote Authentication is required, then Kerberos needs to
be enabled.
®
Xerox WorkCentre
8
Pro 123/128/133
Quick Scan to FTP Setup