Joie litetrax S Manuel D'instructions page 8

Use Shoulder & Waist Harnesses
see images
- 18
15
! In order to protect your child from falling out, after your child is placed into the seat, check whether the
shoulder and waist harnesses are at proper height and length.
- 1
15
Shoulder harness anchor A
- 2
15 Shoulder harness anchor B
15 - 3
Slide adjuster
For larger child, use shoulder harness anchor A and the highest shoulder slots. For smaller child, use shoulder
harness anchor B and the lowest shoulder slots.
To adjust the position of the shoulder harness anchor, turn the anchor to be level with the side facing forward.
Thread it through the shoulder harness slot from back to front.
17
child's shoulder height.
18
Use slide adjuster to change the harness length.
- 2
Press the button 18 , while pulling the waist harness to proper length.
Adjust Calf Support
see image
19
The calf support has 2 positions.
To raise the calf support, push it upwards. A "click" sound means the calf is locked completely.
To lower calf support, press the adjustment buttons on both sides of the calf support
- 2
support downwards. 19
Use Front Swivel Lock
see image
20
Front wheel locked or unlocked status as 20
Tip
It is recommended to use swivel locks on uneven surfaces.
Use Brake
see images
-
21 22
To lock the rear wheels, step down on the brake lever.
To unlock the rear wheels, step down the brake lever again.
Tip
Always set the parking brake when stroller is not moving.
Use Canopy
see image
23
The canopy can be opened or folded, pull it toward front or back.
Use Shoulder Harness Cover and Crotch Harness Cover
see imags
-
24 25
The shoulder harness cover or crotch harness cover can be removed from the webbing. To assemble shoulder
harness cover and crotch harness cover in reverse steps.
13
16 Rethread it through the slot that is closest to
- 1
- 3
18
19 - 1
, and rotate the calf
21
22
23
Fold Stroller
see images
26 - 28
! Please fold the canopy before folding the stroller.
1. Press the folding button. 26
2. Pull the folding webbing upward, the frame will automatically fold backward.
3. The storage latch will automatically hook onto the storage mount, then the stroller is folded and locked
completely. The stroller can stand when folded.
Use Accessories
Accessories may be sold separately or may not be available depending on region.
Use with Joie Carry Cot
see image
29
When using with Joie carry cot Ramble & Ramble XL, please refer to the following instructions.
!
If you have any problems about using the carry cot, please refer to their own instruction manuals.
! Always use the mattress when using the carry cot.
! Please don't fold stroller when attaching the carry cot.
Use Rain Cover
see image
30
To assemble the rain cover, place it over the stroller, and then attach the 8 pairs of hook and loop fasteners on
the rain cover. 30
! Before using the rain cover, please make sure the backrest has been adjusted to the lowest position and the
infant child restraint has been fastened.
! When using the rain cover, please always check its ventilation.
! When not in use, please check that the rain cover has been cleaned and dried before folding.
! Do not fold the stroller after assembling the rain cover.
! Do not place your child into the stroller assembled with rain cover during hot weather.
Use with Joie Child restraint
see images
-
31 37
When using with Joie child restraint Gemm, i-Gemm 3 & i-Level Recline & i-Snug 2 & i-Jemini, please refer to
the following instructions.
!
Before using the infant child restraint, please make sure the backrest has been adjusted to the lowest
position and the infant child restraint has been fastened.
!
If you have any problems about using the infant child restraint, please refer to their own instruction manuals.
!
Please don't fold stroller when attaching the child restraint.
27
28
14