Grohe Sensia IGS Serie Guide Rapide page 4

GB
Without ducting for concealed water connection
New installation or refitting
Corner valve fitting
A corner valve can also be fitted within the technical unit.
The water connection must have already been installed at
the position described in the dimensional drawing during
the construction phase.
1
2
2
Conventional corner valve (on-site)
1
GROHE Sensia IGS water connection set, short
®
2
Ducting for visible water connection
New installation or refitting
Connection of the corner valve is visible on the side
GROHE Sensia IGS water connection set, short
®
Remaining materials (e.g. corner valve) on-site
19.5 15
Connections are Without ducting for visible water connection
concealed New installation or refitting
Connection with copper pipe from the actuator plate of the
cistern
GROHE Sensia IGS water connection set, short
®
Remaining materials (e.g. copper pipe and screws) on-site
Without ducting for visible water connection
New installation or refitting
Connection with copper pipe from washbasin
GROHE Sensia IGS water connection set, short
®
Remaining materials (e.g. copper pipe, screws and
dual regulating valve) on-site