VALBERG UF NF 240 E S180C Consignes D'utilisation page 32

C
Useful information
CAUTION
Only after the door seals are completely dry should the
appliance be powered on.
Replacing the LED light
This product contains a light source of energy efficiency
class F.
Light source in this product can only be replaced by qualified
professionals.
Please contact after-sales service if the light source fails.
The light source shall be removed at the end of the product's
useful life, with sorting and recycling done separately.
To replace the LED light, the below steps can be followed:
1. Unplug your appliance.
2. Remove light cover by pushing up and out.
3. Detach the LED and pull it while pressing the connector
latch.
4. Replace LED light and snap it correctly in place.
25 EN