Marquant MCR-1295 Mode D'emploi page 25

MENU OPERATION
※ AUDIO FUNCTION FOR VCD
Press Audio on the remote control or click L-R icon on the screen during playback to change the
channel, such as MONO L, MONO R and STEREO.
※ PROGRAM PLAY
In program play mode, you can play the track in your desired sequence.
To program play a disc, please follow the next instructions.
For VCD/CD/MP3:
1) In PBC OFF mode. Press PROG button on the remote control to enter program edit interface.
2) Use /
selected will become highlight.
3) Input the sequence number you want to program by numeric buttons (0-9) on the remote control.
4) Use cursor buttons to select PLAY character, then press ENTER button on remote control to
confirm. And "PRG PLAY" will appear on the screen. The unit will play the tracks you programmed.
5) If you want to clear the program, use cursor buttons to select CLEAR character and press ENTER
will clear the information you have programmed. And "PRG CANCEL" will appear on the screen.
For DVD:
The operation is the same as VCD/CD operation.
Press PROG button on the remote control the following media play window will be shown on the screen:
※
NP--- click to switch the mode of TV SYSTEM, such as AUTO, NTSC and PAL.
※
LUD--- click to switch loudness on or off.
※
EQ--- click to change the equalization mode, such as EQ OFF, POP, ROCK, CALS, JAZZ, FLAT and
VOCAL.
※ DVD SETUP
In DVD mode, when the disc is playing or in stop mode, press Setup on the remote control to enter setup
menu.
, / cursor buttons to select the items you want to program. The items you
25