Marquant MCR-1295 Mode D'emploi page 19

MENU OPERATION
※
APS--- click to start automatic memory storing/program scanning function.
- Automatic memory storing
Press and hold AMS button on remote control or APS icon about several seconds, the radio searches
from the current frequency and checks the signal strength until one cycle search is finished. And then
stations are stored into the preset number button in turn according to the strength of the stations. When
auto seek is finished, it will enter into preset scan mode automatically.
- Program scanning
Shortly press AMS button or APS icon to scan all station presets saved in memory. And it will hold at
each station for several seconds.
※ STATION STORING
The preset buttons (numeric buttons 1~6) on remote control and M1~M6 bar displayed on touch screen
can be used to store 6 stations in each band for convenient access to your favorite stations. The stations
might be FM1, FM2, FM3, AM1 (MW1), AM2 (MW2) band. The operation is as below:
Programming stations
1. Select the desired band, then tune in the station you want to store in memory.
2. Press and hold one of the preset buttons or M1~M6 bar for several seconds, the current station
will be stored to the location button. Repeat steps 1. and 2. to program additional stations.
Quick tuning
Select the desired band, then press one of the six preset buttons on
remote control or tap M1~M6 bar displayed on screen will retrieve the corresponding station which
had been stored in the memory.
※
MONO/STEREO
You can press ST button on remote control or click ST icon on the screen to select mono or stereo
mode. You can sometimes improve reception of distant stations by selecting mono operation.
※
LOCAL/DISTANCE
Press LOC button on the remote control or click LOC icon on the radio menu to select between local
and distant stations.
Local setting for reception of strong station, and a distant setting for reception of weaker stations.
When search station in local mode, if there is no station available, it will switch to distant mode and
search station automatically. If there is no station available too it will stop searching and return to local
mode.
When search station in distant mode, if there is no station available, it will stop searching in distant
mode.
※ EQUALIZATION
EQ--- click to change the equalization mode, such as EQ OFF, POP, ROCK, CALS, JAZZ, FLAT and
VOCAL.
19