Publicité
Les langues disponibles
Les langues disponibles
Problem
The flame is blow out immedi-
ately after ignition
The gas ring burns unevenly
The appliance does not operate The fuse in the fuse box is re-
The oven does not heat up
The oven does not heat up
The oven lamp does not oper-
ate
Steam and condensation settle
on the food and in the oven
cavity
If you cannot find a solution to the problem
yourself, contact your dealer or the service
centre.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
INSTALLATION
Warning! Refer to "Safety information"
chapter.
Location of the appliance
You can install your freestanding appliance
with cabinets on one or two sides and in
the corner.
Keep a distance of about 1 cm be-
tween the appliance and the wall to
make sure that the lid opens.
All manuals and user guides at all-guides.com
Possible cause
Thermocouple is not heated
sufficient
Burner crown is blocked with
food residues
leased
The oven is not switched on
The necessary settings are not
set
The oven lamp is defective
You left the dish in the oven for
too long
After lightning the flame, keep
the knob pushed for approxi-
mately 5 seconds.
Make sure that the injector is
not blocked and the burner
crown is clear of food particles.
Control the fuse. If the fuse is
released more than one time,
refer to a qualified electrician.
Switch on the oven
Control the settings
Replace the oven lamp
Do not leave the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking process
ends
The necessary data for the service centre is
on the rating plate. The rating plate is on
the front frame of the oven cavity.
.........................................
.........................................
.........................................
A
C
electrolux 69
Remedy
B
C
Publicité
