Publicité
Les langues disponibles
Les langues disponibles
During heating pump mode, remove the lower drain plug from the back
of the unit, install the drain connector(5/8" universal female mender) with 3/4"
hose(locally purchased). Carefully move the unit to a drain location, and let
the water drain away.
Remove the lower drain plug
Continuous drain hose
Note :
Make sure the drain hose is lower than the bottom tray drain outlet.
- When the water level of the bottom tray reaches a predetermined level, the
unit beeps 8 times, the digital display area shows "P1" .
At this time the air conditioning/dehumidification process will immediately
stop. However, the fan motor will continue to operate (this is normal). Care-
fully move the unit to a drain location, remove the bottom drain plug and let
the water drain away. Reinstall the bottom drain plug and restart the machine
until the "P1" symbol disappears. If the error repeats, call for service.
` P N Y R $ $ = ; B = =
Note :
Be sure to reinstall the bot-
tom drain plug firmly to pre-
vent leakage before using the
unit.
ENG
22
Publicité
