Optimea OPC-B01-120 Manuel D'utilisation page 50

TIMER operation
- When the unit is on, press the Timer button will initiate the Auto-off stop
program, the TIMER OFF indicator light illuminates. Press the UP or down
button to select the desired time. Press the TIMER button again within 5
seconds, the Auto-on start program is initiated. And the TIMER ON indicator
light illuminates. Press the up or down button to select the desired Auto-on
start time.
- When the unit is off, press the Timer button to initiate the Auto-on start pro-
gram, press it again within 5 seconds will initiate the Auto-off stop program.
- Press or hold the UP or DOWN button to change the Auto time by 0.5 hour
increments, up to 10 hours, then at 1 hour increments up to 24 hours. The
control will count down the time remaining until start.
- The system will automatically revert back to display the previous tempera-
ture setting if there is no operation in a 5 seconds period.
- Turning the unit ON or OFF at any time or adjusting the timer setting to 0.0
will cancel the Auto Start/Stop timer program.
SLEEP(ECO) operation
- Press this button, the selected temperature will increase(cooling) or de-
crease(heating) by 1°C/2°F(or 1°F) 30 minutes. The temperature will then
increase (cooling) or decrease (heating) by another 1°C/2°F(or 1°F) after an
additional 30 minutes. This new temperature will be maintained for 7 hours
before it returns to the originally selected temperature. This ends the Sleep/
Eco mode and the unit will continue to operate as originally programmed.
Note :
This feature is unavailabe under FAN or DRY mode.
ENG
20