Swing/Wireless(On some models) button
Used to initiate the Auto swing feature. When the operation is ON, press the
SWING button can stop the louver at the desired angle. Used to initiate the
Wireless function. For the first time to use Wireless function, press and hold
the swing button for 3 seconds to initiate the Wireless connection mode.
The LED DISPLAY shows 'AP' to indicate you can set Wireless connection. If
connection(router) is successful within 8 minutes, the unit will exit Wireless
connection mode automatically and the Wireless indicator illuminates. If con-
nection is failure within 8 minutes, the unit exits Wireless connection mode
automatically. After Wireless connection is successful, you can press and hold
SWING and DOWN (-) buttons at the same time for 3 seconds to turn off Wire-
less function and the LED DISPLAY shows 'OF' for 3 seconds, press SWING
and UP(+) buttons at the same time to turn on Wireless function and the LED
DISPLAY shows 'On' for 3 seconds.
Note : When you restart the Wireless function, it may take a period of time
to connect to the network automatically.
Timer button
Used to initiate the AUTO ON start time and AUTO OFF stop time program, in
conjuction with the + & - buttons. The timer on/off indicator light illuminates
under the timer on/ off settings.
Mode button
Selects the appropriate operating mode. Each time you press the button, a
mode is selected in a sequence that goes from AUTO), COOL, DRY, FAN. The
mode indicator light illuminates under the different mode settings.
Up (+) and Down (-) buttons
Used to adjust (increasing/decreasing) temperature settings in 1°C/1°F (or 2 °F)
increments in a range of 17°C/62°F to 30°C/86°F (or 88°F) or the TIMER setting
in a range of 0~24hrs.
Note : The control is capable of displaying temperature in degrees Fahren-
heit or degrees Celsius. To convert from one to the other, press and hold
the Up and Down buttons at the same time for 3 seconds.
Sleep(Eco) button
Used to initiate the SLEEP/ECO operation.
ENG
18