Publicité
Les langues disponibles
Les langues disponibles
2.2 Design notice :
In order to ensure the optimal performance of our products, the design spe-
cications of the unit and remote control are subject to change without prior
notice.
2.3 Ambient temperature range for unit operating :
2.4 Exhaust hose installation :
The exhaust hose and adaptor must be installed or removed in accordance
with the usage mode. For COOL,HEAT(heat pump type) or AUTO mode must be
installed exhaust hose. For FAN, DRY or HEAT (electrical heat type) mode must
be removed exhaust hose.
2.5 Choosing the right location :
-DO NOT cover the Intakes, Outlets or Remote Signal Receptor of the unit, as
this could cause damage to the unit.
2.6 Recommend installation :
MODE
Cool
17 – 35 C (62 – 95 F)
Dry
13 – 35 C (55 – 95 F)
Your installation location should meet the following
requirements:
-Make sure that you install your unit on an even sur-
face to minimize noise and vibration.
-The unit must be installed near a grounded plug, and
the Collection Tray Drain (found on the back of the
unit) must be accessible.
-The unit should be located at least 30cm (12") from
the nearest wall to ensure proper air conditioning.
The horizontal louver blade should be at least 50cm
(19.7") away from obstacles.
Temperature Range
ENG
14
Publicité
