Publicité
Les langues disponibles
Les langues disponibles
4.3 Other features :
AUTO-RESTART
If the unit breaks off unexpectedly due to the power cut, it will restart with the
previous function setting automatically when the power resumes.
AIR FLOW DIRECTION ADJUSTMENT
Adjust the air flow direction manually:
- The louver can be set to the desired position manually.
- Do not place any heavy objects or other loads on the louver, doing so will
cause damage to the unit.
- Ensure the louver is fully opened under heating operation.
- Keep the louver fully opened during operation.
WAIT 3 MINUTES BEFORE RESUMING OPERATION
After the unit has stopped, it can not be restarted operation in the first 3
minutes. This is to protect the unit. Operation will automatically start after 3
minutes.
POWER MANAGEMENT feature(on some models)
Under cooling operation, when the ambient temperature is lower than the
setting temperature for a period of time, the unit will be automatically operate
power management feature. The compressor stop but the fan motor do not
stop. When the ambient temperature is higher than the setting temperature,
the unit will be automatically quit the power management feature. The com-
pressor and (or) fan motor run.
WATER DRAINAGE
- During dehumidifying modes, remove
the drain plug from the back of the
unit, install the drain connector (5/8"
universal female mender) with 3/4"
hose(locally purchased). For the mo-
dels without drain connector, just at-
tach the drain hose to the hole. Place
the open end of the hose directly
over the drain area in your basement
floor.
Remove the
upper drain plug
Continuous
drain hose
ENG
21
Publicité
