Publicité
Les langues disponibles
Les langues disponibles
Connecting with a portable audio device
Stereo mini plug cord
(not supplied)
In the door of the
front panel
AUX 1
• By using QP Link (Quick Portable Link), you can
easily start playing back a portable audio device
on this unit. See page 33 for details.
• If an external device is not equipped with a
stereo mini plug audio output, use a plug
adaptor to convert the stereo mini plug to the
corresponding plug of the audio output.
Connecting with TV
Supplied composite video cord
Main unit
COMPONENT
VIDEO
Y
P
P
B
R
S-VIDEO
VIDEO OUT
CAUTION
Connect the main unit directly with a TV (or a
monitor) without routing through a VCR.
Otherwise it may cause picture distortion while
playing.
Main unit
Connecting directly
Also, when connecting the main unit to a TV with
a VCR built in, there may be picture distortion
while playing.
You can enjoy pictures of better quality using the
following cord instead of the supplied video cord.
Connecting by using the S-Video cord
S-Video cord (not
Main unit
supplied)
COMPONENT
VIDEO
Y
P
P
B
R
S-VIDEO
VIDEO OUT
Connecting by using the component video
cord
Portable
audio device
You can enjoy better quality pictures than when
using the S-Video cord.
TV
CAUTION
Use either the S-Video cord or the component
video cord. If both cords are used, pictures may
not be played properly.
NOTE
TV (or
monitor)
• In order to enjoy pictures with Progressive mode
(page 26), the TV is required to have Progressive
video input.
• If the component video input jacks of your TV are
BNC type, use a plug adapter (not supplied) to
convert the plugs.
Connecting the power cord
AC outlet
TV
• Connect the power cord after all other
connections are complete.
• The STANDBY lamp (on the front panel) will be
lit.
TV
Component video cord
(not supplied)
Blue
Green
COMPONENT
VIDEO
Y
P
P
B
R
VIDEO OUT
Main unit
Supplied power cord
Getting started
Red
S-VIDEO
Main unit
11
Publicité
