Gardena 966805002 Manuel Du Propriétaire page 8

MIDDLE CHUTE ASSEMBLY
1. Place middle chute over the top end of the blower
assembly, lining up the blower latch and the acorn
nut on the middle chute.
2. Stretch bungee latch up onto acorn nut to secure.
Slide the upper chute discharge end into the hood
inlet and fit the lower end over middle chute. Secure
middle chute to upper as in Step 1.
3. Rotate the chute so the opening is facing
downwards toward the container bags.
UPPER CHUTE ASSEMBLY
NOTE: The kit provides parts for both the 42" and 48".
Use the shorter upper chute for a 42" collection system
and the longer upper chute for the 48".
1. Slide upper chute onto middle chute, lining up the
middle chute latch and the acorn nut on the upper
chute.
2. Stretch bungee latch up onto acorn nut to secure.
8
ASSEMBLY
Middle Chute
Chute Latch
Upper Chute
CHUTE / HOOD INSTALLATION
Push upper chute through the gasketed opening in the
cover assembly.
Cover Inlet
CONTAINER INSTALLATION
1. Install containers on support frame, overlapping
containers at center tube.
2. Close cover and lock latch handle over support
tubes.
NOTE: One container should always overlap the other
container at the center tube.