Dell H955N Démarrer page 21

Starting the UPS
1
Verify that all load segment circuit breakers are in the ON position.
2
Switch the main utility breaker on.
3
Press the button on the UPS front panel.
Completing the Startup
1
Verify that the Normal icon
UPS is operating normally and any loads are powered.
2
On the UPS status summary screen, press the
Resolve any active alarms before continuing. See "Troubleshooting" in the Dell Network
Management Card User's Guide.
If there are no active alarms, a "No Active Alarms" message appears.
3
To change other factory-set defaults, see "Operation" in the Dell Network Management Card User's
Guide.
All manuals and user guides at all-guides.com
appears on the UPS status summary screen, indicating that the
button to check for active alarms or notices.
Installation and Startup
|
19