Télécharger Imprimer la page

Axis 210 Guide D'installation page 7

Masquer les pouces Voir aussi pour 210:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

AXIS 210/210A/211/211A Installation Guide
UPnP™
UPnP
functionality is enabled by default in the AXIS 210/210A/211/211A. If also enabled on
your computer (Windows ME or XP), the AXIS 211/211A will automatically be detected and a
new icon will be added to "My Network Places." Click this icon to access the AXIS 211/211A.
See also page 9 for instructions on how to set the password.
Note:
To install the UPnP™ service on your computer, open the Control Panel from the Start Menu and select
Add/Remove Programs. Select Add/Remove Windows Components and open the Networking Services
section. Click Details and then select UPnP as the service to add.
Manual Installation with ARP/Ping
1. Acquire an unused IP address on the same network segment your computer is connected to.
2. Locate the serial number (S/N) on the camera's underside label (see page 4).
3. Open a Command Prompt on your computer. As appropriate for your operating system,
enter the following commands:
Windows syntax:
arp -s <IP Address> <Serial Number>
ping -l 408 -t <IP Address>
UNIX/Linux/Mac syntax:
arp -s <IP Address> <Serial Number> temp
ping -s 408 <IP Address>
4. Check that the network cable is connected. Start/restart the camera by disconnecting and
reconnecting power, which must be done within 2 minutes of entering the ARP command.
5. Close the Command prompt when you see 'Reply from 192.168.0.125: ...' or similar.
6. Start your browser, type in http://<IP address> in the Location/Address field and press
Enter on your keyboard.
7. See page 9 for instructions on how to set the password.
Notes:
• To open a command prompt in Windows: from the Start menu, select Run... and type cmd (or command in
Windows 98/ME). Click OK.
• To use the ARP command on a Mac OS X, use the Terminal utility, which is found under Application > Utilities.
All manuals and user guides at all-guides.com
UPnP™ is a certification mark of the UPnP
Implementers Corporation.
Windows example:
arp -s 192.168.0.125 00-40-8c-18-10-00
ping -l 408 -t 192.168.0.125
UNIX/Linux/Mac example:
arp -s 192.168.0.125 00:40:8c:18:10:00 temp
ping -s 408 192.168.0.125
Page 7

Publicité

loading

Ce manuel est également adapté pour:

210a211211a