Tripp-Lite SRCOOLDXRW25 Manuel D'installation page 11

3. Condenser Installation (Outdoor Unit)
48.8 in.
(1240 mm)
9.8 in.
(250 mm)
Figure 3-7: Condenser Mounting Interface (side mounted, bottom view looking up), SRCOOLDXRW25 (vertical installation)
3.6 Condenser Pad
If installing the condenser on the ground, provide a cement pad that extends at least 2 in. (50 mm) from all sides of the
condenser.
Note: For colder weather installations, make sure to keep the condenser off of the ground.
Refer to local codes for pad height and other condenser pad requirements.
11