Braun PrecisionSensor BP 2510 Manuel D'instructions page 9

The display will change from «on» to «- -» (off).
To re-activate the sensor, press the I/0 button again.
Confirm your settings as follows:
Model BP 2510: press the memory button.
Model BP 2005: press the select button for several
seconds.
Turning off the product
Press the I/0 button to turn the product off.
Otherwise the product will turn off automatically
after 2 minutes.
Storage and cleaning
Clean the housing of the product with a damp, soft
cloth. Stains on the cuff (G) can be carefully removed
with a damp cloth. Do not wash or dry clean the cuff.
Do not store the product in a place exposed to direct
sunlight or high humidity. Do not submerge in water
and do not spill liquids on the device.
Calibration
This product has been calibrated at the time of
manufacture. If used according to the use
instructions, periodic re-calibration is not required.
If at any time you question the measuring accuracy,
please call 1-888-848-2572.
Manufacturing date is given by the LOT number on
the back of the product.
The first number after LOT represents the last digit of
the year of manufacture.
The next three digits give the day of the year of
manufacture.
An example: LOT 0116 xx xx – this product
has been manufactured on the 116th day of the
year 2000.
9