Publicité
Les langues disponibles
Les langues disponibles
• Check periodically that the motor air slots are clean and free of
chips.
• Replace the kerf plate when worn.
• Disconnect the machine from the mains before carrying out any
maintenance work or when changing the blade.
• Never perform any cleaning or maintenance work when the
machine is still running and the head is not in the rest position.
• When possible, always mount the machine to a bench.
Residual Risks
The following risks are inherent to the use of saws:
– injuries caused by touching the rotating parts
In spite of the application of the relevant safety regulations and the
implementation of safety devices, certain residual risks cannot be
avoided. These are:
– Impairment of hearing.
– Risk of accidents caused by the uncovered parts of the rotating
saw blade.
– Risk of injury when changing the blade.
– Risk of squeezing fingers when opening the guards.
– Health hazards caused by breathing dust developed when sawing
wood, especially oak, beech and MDF.
Labels on Tool
The following pictograms are shown on the tool:
Read the instruction manual before use
Safe use warning
Carrying point
Electrical Safety
The electric motor has been designed for one voltage only. Always
check that the power supply corresponds to the voltage on the rating
plate.
Your tool is double insulated in accordance with EN 61029;
therefore no earth wire is required.
In case of cord replacement the tool must only be repaired by an
authorized service agent or by qualified electrician.
Mains Plug Replacement
(U.K. & Ireland only)
• Should your mains plug need replacing and you are competent to
do this, proceed as instructed below. If you are in doubt, contact
an authorized D
WALT repair agent or a qualified electrician.
E
• Disconnect the plug from the supply.
• Cut off the plug and dispose of it safely; a plug with bared copper
conductors is dangerous if engaged in a live socket outlet.
• Only fit 13 Amperes BS1363A approved plugs fitted with the
correctly rated fuse (1).
• The cable wire colours, or a letter, will be marked at the connection
points of most good quality plugs. Attach the wires to their
respective points in the plug (see below). Brown is for Live (L) (2)
and Blue is for Neutral (N) (4).
• Before replacing the top cover of the mains plug ensure that the
cable restraint (3) is holding the outer sheath of the cable firmly and
that the two leads are correctly fixed at the terminal screws.
4
3
For 115 V units with a power rating exceeding 1500 W, we recommend
tofit a plug to BS4343 standard.
Using an Extension Cable
If an extension cable is required, use an approved extension cable
suitable for the power input of this tool (see technical data). The
minimum conductor size is 1.5 mm
When using a cable reel, always unwind the cable completely. Also refer
to the table below.
Conductor size (mm
Cable length (m)
Voltage Amperes
230
Package Contents
The package contains:
1 Assembled mitre saw
1 Blade spanner
1 Saw blade
1 Instruction manual
1 Exploded drawing
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual prior
to operation.
Description (fi g. A1–A5)
Your DW712 mitre saw has been designed for professional cutting
of wood, wood products, aluminium and plastics. It will perform
the sawing operations of cross-cutting, bevelling and mitring easily,
accurately and safely.
A1
1 On/off switch
2 Moveable lower guard
3 Fence left-hand side
4 Mitre lever
5 Mitre latch
6 Mitre scale
7 Fixed fence
8 Fence right-hand side
9 Bevel position adjustment stop
10 Bevel scale
11 Bevel clamp handle
1
12 Grooving stop
2
13 Rail lock knob
14 Head lock down pin
15 Grooving depth adjustment knob
NEVER use a light socket.
NEVER connect the live (L) or
neutral (N) wires to the earth
pin marked E or
.
.
2
)
Cable rating (Amperes)
2
0.75
1.00
10
1.50
15
2.50
20
4.00
25
7.5
15
25
Cable rating (Amperes)
0 – 2.0
6
6
6
2.1 – 3.4
6
6
6
3.5 – 5.0
6
6
6
5.1 – 7.0
10
10
10
7.1 – 12.0
15
15
15
12.1 – 20.0
20
20
20
E NG L I S H
6
30
45
60
6
6
6
6
6
6
6
10
15
10
15
15
15
20
20
20
25
–
25
Publicité
