Zyxel NWA-3100 Guide De Mise En Route Rapide page 5

Les langues disponibles

2.1 Set Up Your Computer's IP Address

You must first set your computer to use a static IP address in the 192.168.1.3 -

192.168.1.254 range with a subnet mask of 255.255.255.0. This ensures that your

computer can communicate with your NWA-3100.

The following instructions are for the Windows 2000, Windows NT and Windows XP

operating systems.

1 In Windows XP, click Start > Control Panel.

In Windows 2000/NT, click Start > Settings > Control Panel.

2 In Windows XP, click Network Connections.

In Windows 2000/NT, click Network and Dial-up Connections.

3 Right-click Local Area Connection and then click Properties.

4 Select Internet Protocol (TCP/IP) (under the General tab in Windows XP) and click

Properties.

5 The Internet Protocol TCP/IP Properties screen opens (the General tab in Windows

XP).

6 Select Use the following IP address and fill in the IP address (choose one in the

range 192.168.1.3 - 192.168.1.254), Subnet mask (255.255.255.0), and Default

gateway (192.168.1.2) fields.

7 Click OK to close the Internet Protocol (TCP/IP) Properties window.

8 Click Close (OK in Windows 2000/NT) to close the Local Area Connection

Properties window.

ENGLISH