Zyxel NWA-3100 Guide De Mise En Route Rapide page 10

7 Click the Security tab. Ensure
that Security01 is selected
and click Edit.
8 This is where you can enter
the security settings for your
wireless network. The fields
you fill in differ according to
the type of security you select
in the Security Mode field.
Select None if you do not wish
to use wireless security.
This example uses WPA2-PSK
security, in which all wireless
clients must use the same pre-
shared key to join the network.
Ensure that all your wireless
clients can use the type of
security you set. Click Apply
when you have finished.
9 Click IP in the navigation
panel.
If you have an IP address to
use, select Use fixed IP
address and enter it along with
the subnet mask and gateway
IP address. Otherwise, select
Get automatically from DHCP.
Click Apply.
ENGLISH
9