To level stand
The stand is equipped with two adjustable
feet for leveling the stand.
To adjust: loosen wing nut and adjust the
height of the foot by screwing the threaded
shaft clockwise to raise foot or counter-
clockwise to lower foot. Retighten wing nut
securely.
To reduce the risk of injury,
!
WARNING
periodically check that all
fasteners are attached and adjusted
according to the assembly instructions
included in this manual.
All manuals and user guides at all-guides.com
Operating Instructions
Maintenance
The TS2000 tires are shipped with an air
pressure of 25 to 30 P.S.I. — an adequate
pressure for most working conditions. If you
wish to increase the tire pressure for a
slightly firmer support, you may inflate the
tires to a maximum of 50 P.S.I. It is
recommended that a hand pump is used.
-8-
Tire Pressure