Westfalia 85 26 02 Mode D'emploi page 41

All manuals and user guides at all-guides.com
Inserting and Removing the Battery
1. Insert the battery (10) into the slot of
the unit. Do not apply force when
inserting the battery into the slot.
Iserting can be achieveed easily and
without resistance.
2. The battery
completely until the battery release
clip (1) audibly lock into place. To
remove the battery, press the battery
release clip and pull out the battery.
Attaching the Auxiliary Handle
Do not operate the angle grinder
without the auxiliary handle (8).
There are two threaded mounting
holes in the transmission housing,
one in each side, to which the
auxiliary handle can be attached.
Changing the Grinding Disc
Please Note! Always remove the
battery before changing the disc to
avoid accidental starting.
1. Lossen the outer flange (13) with
the included face wrench (11).
Keep the
pressed to lock the spindle and
the disc.
Operation
must be
spindle lock
inserted
Bore Hole
(3)
3
37
8
11