Westfalia 85 26 02 Mode D'emploi page 14

ter the attachment has been checked and attached, please
keep yourself and other persons out of the rotating area of the
attachment and let the machine run at full speed for one mi-
nute. Most damaged attachments and tools will fail within that
time.
 Wear personal protective equipment. If necessary and
depending on the application, wear full face protection,
eye protection, or safety goggles. If necessary, wear a
dust mask, ear protection, safety gloves or a safety
apron which protect you from flying fragments. The
eyes must be protected from flying debris, which are
generated by many operations. Dust must be filtered
out by the dust mask or breath protection. If you are exposed
to high levels of noise for extended amounts of time, your
hearing may be damaged.
 Keep other persons at a safe distance from your working
area. Persons entering your working area must wear personal
protective equipment. Fragments of the work piece or the at-
tachment may be thrown away and cause injuries outside the
immediate working area.
 Do not lay down the electric tool before the attachment has
stopped spinning. The spinning attachment may come in
touch with the surface, which may cause loss of control.
 Do not carry the electric tool while it is running. Clothes may
become caught in the spinning attachment and the attach-
ment may cause severe injury.
 Periodically clean the ventilation slots of the electric tool. The
cooling ventilator draws dust into the housing. An accumula-
tion of metallic dust may lead to dangerous electrical condi-
tions.
 Do not use the tool close to combustible materials. Flying
sparks may ignite such materials.
All manuals and user guides at all-guides.com
Safety Notes
10