Publicité
Les langues disponibles
Les langues disponibles
Heating during the transition period
Cladding
Prerequisite for the stove to function well is the correct
delivery pressure (chimney draught). This very much
depends on the external temperature. Therefore, if the
external temperatures are high (above 16°C) the deliv-
ery pressure can be disrupted.
What to do?
● Open the combustion air slide valve complete.
● Only put on a small quantity of fuel.
● Frequently stoke the ash.
Cleaning
● The cladding may not be overheated, as cracks
could appear.
● Use a maximum of 3 kg wood or briquette for heating.
● As the natural cladding comes from a „grown" boul-
der, structure and colour scheme may be very
different.
● The surface may be altered under temperature
What?
inside of stove
connection piece
glass panel
painted surfaces
influence.
How often?
at least 1 x per year
at least 1 x per year
as required
All manuals and user guides at all-guides.com
as required
Special information
The manufacturer's guarantee expires if the stove is
nominal heating output, or if fuels other than those list-
ed are used.
● The stove must only be used with the combustion
chamber door shut.
proof, non-combustible container.
● Attention: The surfaces get hot! Always use the en-
closed glove when operating the stove.
● Convection air openings may not be covered.
tered. In particular, it must be ensured that any nec-
place is being used.
stove.
using glass cleaner for
stoves- and oven glasses
significantly or permanently overloaded above the
● Never remove hot ashes. Only store ashes in a fire-
● Never use white spirit, benzene or other inflamma-
ble, hazardous materials to ignite the fire.
● The combustion air supply fittings must never be al-
essary combustion air pies are open while the fire-
● Do not make any changes or modifications to the
with a slightly damp microfibre cloth
Using what?
hand brush,
vacuum cleaner
hand brush,
vacuum cleaner
when cold
when cold
19
Publicité
