HSM SECURIO B24 Notice D'utilisation page 14

5 Operation
WARNING
Before switching the machine on,
make sure that you observe all
safety instructions.
Switching on the shredder
• Connect the power plug of the machine
into a properly installed socket.
• Only US-version: Set mains switch at rear
of paper shredder to „I".
• Press the operation button.
 The "Ready for operation" indicator lights
up.
Shredding paper
• When you feed paper, the light barrier
automatically starts the cutting unit.
 Two seconds after the light barrier in the
paper feed opening is free again, the cut-
ting unit is switched off automatically and
the shredder switches to standby.
Shredding CDs
(only in cut size: 3.9 mm, 5.8 mm, 4.5x30 mm)
14
Note:
You can fold the safety
element upwards to
shred larger quantities
of paper. This makes it
easier to access the
feed opening.
• Only feed the material
into the insertion slot of
the safety element
(splinter protection).
Note:
To completely separate
the materials shredded,
you can insert the CD
bag supplied.
SECURIO B 24
english
Shredding credit cards
Feed the cards through the CD slot
when the cut size is 3.9 mm, 5.8 mm and
4.5x30 mm. For other machines, use the
opening for paper.
Switching off the shredder
• Press the operation button.
 The "Ready for operation" indicator goes
out.
• Only US-version: Set mains switch at
rear of paper shredder to „0".
11/2012