Operating Manual; Normal Intended Use; Risidual Risks; Safety Instructions - ATIKA GHB 760 A Notice Originale

S y m b o l s o
S y m b o l s o
Threatened hazard or hazardous situation. Not observing
this instruction can lead to injuries or cause damage to
property.
Important information on proper handling. Not observing
this instruction can lead to faults.
User information. This information helps you to use all the
functions optimally.
Assembly, operation and servicing. Here you are
explained exactly what to do.
Please refer to the attached assembly
and operating instruction sheet for
references to figure numbers in the
text.
...
N o r m a l
N o r m a l
The normal intended use includes the shredding of
− branches of any kind
filling hopper: up to 10 mm diameter (depending on wood
species and freshness)
side hopper: up to 76 mm diameter (depending on wood
species and freshness)
− wilted, moist garden refuse that has already been stored for
several days, alternating with branches
Shredding of glass, metal, plastic parts, plastic bags, stones, fabric
cut-offs, roots with soil, waste without solid consistency (e.g. kitchen
scraps) is explicitly excluded.
Metallic parts (nails etc.) and other foreign objects have
unconditionally to be removed from the material to be shredded.
Never start the product in closed rooms or poorly ventilated areas
risk of carbon monoxide poisoning.
The machine may not be used in a potentially explosive environment
or be exposed to rain.
The intended usage also includes compliance with the operating,
servicing and repair conditions prescribed by the manufacturer and
following the safety instructions included in the instructions.
Any other use is deemed not to be intended use. The manufacturer is
not liable for any type of damage resulting from this: the user bears
the sole risk.
Unauthorised modifications on the garden shredder exclude a liability
of the manufacturer for damages of any kind resulting from it.
Only persons who are familiarised with the device and informed
about possible risks are allowed to prepare, operate and service this
device. Repair works may only be carried out by us or by a customer
service agent nominated by us.
R i s i
R i s i
Even if used properly, residual risks can exist even if the
relevant safety regulations are complied with due to the design
determined by the intended purpose.
Residual risks can be minimised if the "Safety instructions" and the
"Normal intended use" as well as the whole of the operating
instructions are observed.
Observing these instructions, and taking proper care, will reduce the
risk of personal injury or damage to the equipment.
14
p e r a t i n g m a n u a l
p e r a t i n g m a n u a l
i n t e n d e d u s e
i n t e n d e d u s e
d u a l r i s k s
d u a l r i s k s
Risk of injuries when protective devices which are secured so
that they can only be removed with a tool are removed while the
machine runs.
Risk of injury to the fingers and hands, if your hand grasps
through an opening and reaches the blade unit.
Risk of injury to the fingers and hands, when carrying out
assembly work and cleaning on the blade unit.
Injury by the chopped material spinning away near the hopper.
Electric shock when touching the spark plug connector while the
engine runs.
Burning when touching hot parts.
Carbon monoxide poisioning when using the device in closed or
poorly ventilated rooms.
Impairment of hearing when working on the machine for longer
periods of time without ear protection.
In addition, in spite of all the precautionary measures taken, non-
obvious residual risks can still exist.
S a f e t y
S a f e t y
Before starting this device, read and keep to the following
advice. Also observe the preventive regulations of your professional
association and the safety provisions applicable in the respective
country, in order to protect yourself and others from possible injury.
Pass the safety instructions on to all persons who work with
the machine.
The operating instructions of the engine are part of the
machine and must be passed on to any person working with
the machine.
Keep these safety instructions in a safe place.
Repair works on the safety cut out must be carried out by the
manufacturer or by companies appointed by the manufacturer
respectively.
Make yourself familiar with the equipment before using it, by
reading and understanding the operating instructions.
Do not use the machine for unsuitable purposes (see 'Normal
intended use' and 'Working with the garden shredder').
Provide a safe standing position and keep at any time the
balance. Do not lean forward. When placing material into the
shredder, always stand on the same level as the machine.
Be attentive. Be careful what you do. Behave sensibly when
working. Do not use the device when you are tired or under the
influence of drugs, alcohol or medicaments. One moment of
carelessness when using the device can result in serious injuries.
Wear protective goggles, gloves and noise protection while
working with the machine.
Wear suitable work clothes:
− do not wear loose-fitting clothes
− slip-proof shoes
Within his area of work the operator is responsible for third
parties.
The machine must not be operated by children or young people
under 16 years of age.
Keep children away form machine.
Never operate the machine if other persons are in the immediate
vicinity.
Never leave the device unattended.
Keep your workplace in an orderly condition! Untidiness can
result in accidents.
Choose a working position alongside the equipment or behind it.
Never stand near the ejection opening.
Never reach into the filling or ejection opening.
Keep your face and body away from the filling opening.
i n s t r u c t i o n s
i n s t r u c t i o n s