Publicité
Les langues disponibles
Les langues disponibles
Operation
be adjusted for the remainder of
the current event a Temporary
Temperature change can be
done.
3.
select the Zone that the
temperature change will be
applied.
4.
using the
adjust the set point to the
desired temperature.
5.
select additional Zones if
needed.
! NOTE: all of the settings will
adjust to the programmed settings
at the next event for each of the
specified zones.
Indefinite Temperature Changes
If the temperature in a particular
zone or multiple zones needs
to be adjusted for an indefinite
period of time an Indefinite Tem-
perature Hold can be done.
1.
select the Zone that the tem-
perature hold will be applied.
2.
using the
adjust the set point to the
desired temperature.
3.
Press and hold the
Icon.
4.
select additional Zones if
needed.
16
All manuals and user guides at all-guides.com
and
icons
and
icons
5.
Press the
changes and revert back to
operation mode.
! NOTE: To exit the hold mode,
the user can press the
This will remove all holds that
have been applied.
Factory Reset
If the programmed settings need
to be adjusted significantly, it is
possible to Reset the controller
back to the Factory settings.
1.
Press the
2.
Press and hold the
10 seconds.
The unit will return to the initial
set up screen. This is the same
as removing the battery strip after
unpacking.
icon to save the
icon.
icon.
icon for
www.dimplex.com
Publicité
