Publicité
Les langues disponibles
Les langues disponibles
general Functions
changed by holding down the
time display icon for 3 seconds,
but only the Day, Time and Type
of clock will be displayed to
change.
2.
Changing the Time
When you initially go into the set
up menu the
and
the time adjustment will be flash-
ing and the optional selected time
setting will appear (flashing).
using the
and
time can be adjusted.
! NOTE: If the button is held
down for longer the time will
increase faster.
By pressing the flashing time set-
ting the time display will change
to match the new setting. I.e.
2:12pm will change to 14:12.
as soon as any adjustment is
made the
icon will appear.
Press the
icon to save the
changes and revert back to op-
eration mode.
! NOTE: The time can also be
changed by holding down the
time display icon for 3 seconds,
but only the Day, Time and Type
of clock will be displayed to
change. Press the
save the changes and revert back
All manuals and user guides at all-guides.com
to operation mode.
3.
When you initially go into the set
up menu the temperature will
disappear and the temperature
measurement icon will begin to
icons for
flash. By pressing the icon it will
toggle between °C and °F.
as soon as any adjustment
is made the
icons the
pear. Press the
the changes and revert back to
operation mode.
Measurement unit can also be
changed by holding down the
temperature setpoint display for 3
seconds, and it will change to the
other Temperature Measurement
unit.
4.
The controller features
ConnEX
technology that works with
Dimplex LPC and PCH
ConnEX
simple whole home connectivity
and comfort. ConnEX
controllers are available to control
one or multiple heaters within a
icon to
50' (15 m) radius. In order for the
controller to have this function the
Changing the Temperature
Measurement Unit
icon will ap-
! NOTE: The Temperature
Synchronization Function
, a wireless
TM
heaters to provide
TM
icon save
TM
13
Publicité
